AMD’s Fiji XT and Fiji PRO to be given their own SKU; Hawaii, Tonga and Curaco GPU’s are rebranded, occupying similar positions in the 300-series.
AMD’s Fiji XT and Fiji PRO to be given their own SKU; Hawaii, Tonga and Curaco GPU’s are rebranded, occupying similar positions in the 300-series.
Yesterday that AMD’s upcoming Radeon Rx 300-series launch may consist solely of rebadged Radeon Rx 200-series GPUs. Today partial confirmation appears to have arrived in the form of a leaked product slide from an AMD briefing in May, a slide that also indicates a delayed release of Fiji-based graphics cards.
The slide, part of a kit titled “RADEON GRAPHICS UPDATE”, lays out AMD’s 2015 graphics roadmap. Certain parts are already public knowledge – the R9 380, 370 and 350 were each made available through OEMs last month, although they didn’t have attached codenames. Others have only come to light in recent days, specifically the Grenada GPU (i.e. ‘Enhanced Hawaii’) occupying the top of the Rx 300-series as the R9 390/390X. Finally the slide also indicates that AMD’s brand new Fiji GPU is being reserved for a whole new flagship SKU, which at the time was still under wraps.
In summation:
AMD Radeon R9 290/290X (Hawaii) is replaced by the Radeon R9 390/390X (i.e. ‘Enhanced Hawaii’ AKA Grenada). Reference models equipped with 8GB VRAM.
Radeon R9 280X/285/280 are all replaced by one SKU, the Radeon R9 380. The R9 380 has an Antiga GPU, an updated version of the R9 285’s Tonga.
Radeon R9 270X/270 & R7 260X are all replaced by two new SKUs: Radeon R7 370 (Trinidad GPU) and Radeon R7 360 (Tobago). Both are likely based on the venerable Pitcairn GPU. Note that the R7 370 may have been revised to R9 370, in line with the 200-series.
The Radeon R7 250 remains the entry level GPU for the product stack, unchanged to prevent APU dual-graphics compatibility confusion.
Fiji and Fiji XT will be a part of a brand new SKU different from the Rx 300-series range and at the top of AMD’s graphics product stack.
Radeon R9 280X/285/280 are all replaced by one SKU, the Radeon R9 380. The R9 380 has an Antiga GPU, an updated version of the R9 285’s Tonga.
Radeon R9 270X/270 & R7 260X are all replaced by two new SKUs: Radeon R7 370 (Trinidad GPU) and Radeon R7 360 (Tobago). Both are likely based on the venerable Pitcairn GPU. Note that the R7 370 may have been revised to R9 370, in line with the 200-series.
The Radeon R7 250 remains the entry level GPU for the product stack, unchanged to prevent APU dual-graphics compatibility confusion.
Fiji and Fiji XT will be a part of a brand new SKU different from the Rx 300-series range and at the top of AMD’s graphics product stack.
As mentioned in the original OEM release the new Rx 300-series simplifies AMD’s lineup without offering new hardware to mainstream consumers, and to compete they’ll likely have to cut prices. Enthusiasts will be catered to by a new SKU – Fury and Fury X are currently doing the rounds – competing with NVIDIA’s high-end GeForce hardware (i.e. the GTX 980 TI) and Titan X. Those sporting high-resolution monitors will be able to jump on an 8GB R9 390/390X, in the knowledge that performance will be better than the R9 290/290X thanks to larger frame buffer and (anticipated) higher memory bandwidth.
If the R9 390 and 390X are based on R9 290/290X we should be getting models with 3rd party cooling from the outset, eschewing a repeat of AMD’s dire R9 290X reference cooler.
Also indicated on the slide is a slight delay from the release of the Rx 300-series to the new Fiji-based graphics cards. Hopefully there won’t be a delay or ‘paper launch’. We anticipate that the Rx 300-series will be available from their E3 Event on June 16th; meanwhile Fiji will be formally revealed but not available until slightly later this month.
Concrete information is due on June 16th at the E3 Webcast.
Source: VideoCardz.com
