ADATA introduces another industrial-grade solid state drive – the ADATA ISSS333 SSD. It features a much wider temperature tolerance. The new ADATA ISSS333 industrial-grade SSD is offered in both 3D MLC and 3D TLC versions offering a different set of features and benefits.
ADATA introduces another industrial-grade solid state drive – the ADATA ISSS333 SSD. It features a much wider temperature tolerance. The new ADATA ISSS333 industrial-grade SSD is offered in both 3D MLC and 3D TLC versions offering a different set of features and benefits.
ADATA introduces another industrial-grade solid state drive – the ADATA ISSS333 SSD. It features a much wider temperature tolerance. The new ADATA ISSS333 industrial-grade SSD is offered in both 3D MLC and 3D TLC versions offering a different set of features and benefits but offers the same robustness and reliability in terms of shock resistance, vibration resistance and temperature tolerance. The SSD uses SATA III 6 Gbps interface and is available in the standard 2.5-inch drive form factor. Compared to hard drive drives and consumer-class SSDs, the ISSS333 SSD offers speed, power efficiency and greater reliability for a wider scope of applications.
Key Features
– Higher capacity, durability, and power efficiency
– Industrial-grade extended temperature range of -40°C to 90°C
– SATA III 6Gbps
– Low power consumption: 2.7W (ISSS333 3D MLC) / 3.96W (ISSS333 3D TLC)
– Supports S.M.A.R.T, Wear Leveling, NCQ, and Windows TRIM Command
– Hardware power detector and Flash protection
– Suitable for industrial computing, gaming, embedded applications, surveillance, defense, healthcare and general automation
The ADATA ISSS333 is ideal in many different applications given that it is also available in a wider range of capacities from 128GB to 1TB. It is specially built to handle harsh environments where non-industrial-grade hardware cannot operate. The MLC variant has a wide temperature tolerance of -40 to 90 degrees Celsius. The ADATA ISSS333 can also operate in extreme humidity conditions as low as 5 to 9%. All models also pass 20G vibration resistance and 1500G/0.5ms shock resistance testing. To top all these endurance and reliability features, the ISSS333 SSD series also boast an MTBF rating of 2 million hours. Benefit from S.M.A.R.T drive diagnostics, monitoring, and reporting for easy maintenance on your SSD.
ADATA ISSS333 3D TLC Specifications
Capacity: 120GB~1TB
Dimensions (L x W x H): 100.25 x 69.85 x 7mm
Operating Voltage: 5V
Power Consumption: 3.96W
Shock Resistance: 1500G/0.5ms, Half Sine Wave
MTBF: >2,000,000 hours
Operating Humidity: 0° to 55°C / 5%~95% RH, non-condensing
Flash Type: D TLC
Sequential Read (Max*): 560MB/s
Sequential Write (Max*): 530MB/s
Data Transfer Mode: SATA III 6.0Gbps
Operating temperature (Commercial): 0°C to 70°C
Vibration Resistance: 20G (10~2000Hz)
S.M.A.R.T.: Supported
ADATA ISSS333 3D MLC Specifications
Capacity: 120GB~1TB
Dimensions (L x W x H): 100.45 x 69.85 x 7mm
Operating Voltage: 5V
Power Consumption: 2.7W
Shock Resistance: 1500G/0.5ms, Half Sine Wave
MTBF: >2,000,000 hour
Operating Humidity: 0°C to 55°C / 5%~95% RH, non-condensing
Flash Type: 3D MLC
Sequential Read (Max*): 560MB/s
Sequential Write (Max*): 525MB/s
Data Transfer Mode: SATA III 6.0Gbps
Operating temperature (Industrial): -40°C to 90°C
Operating temperature (Commercial): -10°C to 80°C
Vibration Resistance: 20G(10~2000Hz)
S.M.A.R.T.: Supported
Capacity: 120GB~1TB
Dimensions (L x W x H): 100.25 x 69.85 x 7mm
Operating Voltage: 5V
Power Consumption: 3.96W
Shock Resistance: 1500G/0.5ms, Half Sine Wave
MTBF: >2,000,000 hours
Operating Humidity: 0° to 55°C / 5%~95% RH, non-condensing
Flash Type: D TLC
Sequential Read (Max*): 560MB/s
Sequential Write (Max*): 530MB/s
Data Transfer Mode: SATA III 6.0Gbps
Operating temperature (Commercial): 0°C to 70°C
Vibration Resistance: 20G (10~2000Hz)
S.M.A.R.T.: Supported
ADATA ISSS333 3D MLC Specifications
Capacity: 120GB~1TB
Dimensions (L x W x H): 100.45 x 69.85 x 7mm
Operating Voltage: 5V
Power Consumption: 2.7W
Shock Resistance: 1500G/0.5ms, Half Sine Wave
MTBF: >2,000,000 hour
Operating Humidity: 0°C to 55°C / 5%~95% RH, non-condensing
Flash Type: 3D MLC
Sequential Read (Max*): 560MB/s
Sequential Write (Max*): 525MB/s
Data Transfer Mode: SATA III 6.0Gbps
Operating temperature (Industrial): -40°C to 90°C
Operating temperature (Commercial): -10°C to 80°C
Vibration Resistance: 20G(10~2000Hz)
S.M.A.R.T.: Supported
See product pages below:
ADATA ISSS333 3D TLC SSD: http://industrial.adata.com/en/product/473
ADATA ISSS333 3D MLC SSD: http://industrial.adata.com/en/product/461
