EK Water Blocks announces two new EK-XTOP Revo D5 PWM pump units that include sleeved cables.
EK Water Blocks announces two new EK-XTOP Revo D5 PWM pump units that include sleeved cables.
EK Water Blocks announces two new EK-XTOP Revo D5 PWM pump units that include sleeved cables. The successful pump is getting an upgrade with sleeving using dense high-quality PET black sleeving on both the power cable and PWM cable. Both the EK Water Blocks Acetal and Plexi EK-XTOP Revo D5 PWM pump units are available with sleeved cables. Both the 50cm long power cable and 60cm long PWM signal cable are equipped with black high-quality dense PET sleeving.
EK Water Blocks Acetal EK-XTOP Revo D5 PWM
EK Water Blocks Plexi EK-XTOP Revo D5 PWM
EK Water Blocks Plexi EK-XTOP Revo D5 PWM
The EK Water Blocks EK-XTOP Revo D5 PWM is a high-performance liquid cooling pump, built around the market-proven Xylem D5 PWM water pump and revolutionary EK-XTOP Revo D5 pump volute/body with the revolutionary vibration-reducing mounting clamp.
The D5 pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor, the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic.
The Revo D5 pump volute/body system features a fully rounded design thus offering greater usability, allowing installation at any angle within 360-degree of rotation. Special rubber shock absorber is used to de-couple the main pump body from the mounting clip for silent operation, free of vibration induced noise. Additionally, horizontal and vertical positioning are supported for easier tube routing possibilities.
EK-XTOP Revo D5 PWM Specifications
– Motor: Electronically commuted spherical motor
– Rated voltage: 12V DC
– Power consumption: 23W
– Maximum pressure head: 3.9m
– Maximum flow: 1500L/h
– Maximum system temperature: 60°C
– Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
– Power connector: 4-Pin Molex 50cm cable length
– Signal cable: 4-Pin PWM FAN connector 60cm cable length
– Motor: Electronically commuted spherical motor
– Rated voltage: 12V DC
– Power consumption: 23W
– Maximum pressure head: 3.9m
– Maximum flow: 1500L/h
– Maximum system temperature: 60°C
– Materials: Stainless steel, PPS-GF40, EPDM O-rings, Aluminium oxide, hard coal
– Power connector: 4-Pin Molex 50cm cable length
– Signal cable: 4-Pin PWM FAN connector 60cm cable length
EK-XTOP Revo D5 PWM Performance Chart
The EK Water Blocks EK-XTOP Revo D5 PWM – (incl. sleeved pump) and EK-XTOP Revo D5 PWM – Plexi (incl. sleeved pump) are already available for purchase through EK Webshop. Both has an MSRP of 119,95€ or $ 129.99.
