LIAN LI announces the V3000 PLUS, a modular full tower that can be configured to 3 different modes.
LIAN LI announces the V3000 PLUS, a modular full tower that can be configured to 3 different modes.
LIAN LI finally launches the LIAN LI V3000 PLUS full tower chassis, one of the brand’s largest gaming cases supporting up to EEB form-factor motherboards and extreme liquid cooling setups supporting up to three 480mm radiators. The LIAN LI V3000 PLUS, initially named V3000+, was first introduced as a prototype at the LIAN LI 2021 DIGITAL EXPO 2.0 virtual exhibit thus is quite long overdue for launch.
LIAN LI V3000+ Prototype from LIAN LI 2021 DIGITAL EXPO 2.0
The prototype LIAN LI V3000+ chassis appears to have a tempered glass front panel, this was replaced with a mesh front panel as seen on the LIAN LI V3000 PLUS released today. The front panel also features a single vertical ARGB lightbar in the center. The highlight feature of the V3000 PLUS is the rotating motherboard tray offering three different motherboard layouts: standard, rotated, and dual system. With the dual system, the LIAN LI V3000 PLUS can support a secondary system using a mini-ITX motherboard.
Press Release
LIAN LI announces the V3000 PLUS, a modular full tower that can be configured to 3 different modes. Standard mode fits EEB motherboards with a total of 3 x 480mm radiators and 16 x storage drives. Rotated mode, the motherboard tray is rotated 90 degrees, maintains the same radiator support, and upright GPU installation. Dual System mode fits the main system with support for up to EEB motherboards, and a secondary with Mini-ITX. The V3000 PLUS is available in black, and in January also in white, at an MSRP of $499.99.
Mode 1 – Standard Mode
The LIAN LI V3000 PLUS is compatible with EEB motherboards, up to 16 x 120mm fans, 480mm radiators at the top, front and on the side of the PSU shroud, and a 360mm radiator above it. A removable top radiator bracket, removable side PSU shroud radiator bracket, and multi-position front radiator bracket ensure easy and safe installation of all the cooling hardware. Even the motherboard tray can be removed for the installation of the main components outside of the case.
Mode 2 – Rotated Mode
In rotated mode, the motherboard tray is installed with the rear I/O located at the PSU shroud, with a pass-through channel for the ports to the rear of the case. Maintaining the same cooling support as in Standard mode, upright GPU mounting is also supported for a tower-like look. This mode allows for a unique PC look and direct ventilation of the GPU from the front panel, ensuring optimal thermal performance.
Mode 3 – Dual System Mode
With the motherboard tray elevated, two systems can be installed in the main chamber of the V3000 PLUS. Up to EEB motherboards on the system 1 tray, and a Mini-ITX motherboard above the PSU shroud. In this configuration, up to 11 x 120mm fans, 2 x 480mm radiators (top and front), and up to a 280mm radiator (above PSU shroud) can be installed. The rear panel’s PSU mounting bracket can be replaced by a dual PSU for ATX and SFX mounting compatibility. The same bracket can support a vertical GPU mounted in the PSU shroud compartment with direct air intake from the side mesh panel.
Extreme Storage
The LIAN LI V3000 PLUS is an ideal solution for data storage with support for up to 16 SSDs/HDDs. Inside the PSU shroud, 2 adjustable drive cages hold 4x HDDs/SSDs each. In the main chamber, up to 4 SSDs can be mounted. Alternatively, the mounting brackets can be removed and the PSU shroud drive cages can be relocated beside the motherboard. And behind the motherboard tray, 4 toolless SSD mounting trays are also available for additional storage.
Additional Accessories
The drive cages can be upgraded with hot-swap drive modules. Each backplate supports 2 drives, with a maximum of 4 hot-swap drive modules supported. For a vertical GPU solution while in Standard mode, a 200mm riser cable (90-degree to 180-degree connection) additional accessory is available. In the dual system, the second system’s GPU in the dual system mode, users can mount their GPU in the PSU shroud compartment with an additional 240mm riser cable (90-degree to 90-degree connection) accessory.
Availability
The V3000 PLUS is available for pre-order starting November 18th, 2022. A white version of the V3000 PLUS will be available in January 2023.
Mode 1 – Standard Mode
The LIAN LI V3000 PLUS is compatible with EEB motherboards, up to 16 x 120mm fans, 480mm radiators at the top, front and on the side of the PSU shroud, and a 360mm radiator above it. A removable top radiator bracket, removable side PSU shroud radiator bracket, and multi-position front radiator bracket ensure easy and safe installation of all the cooling hardware. Even the motherboard tray can be removed for the installation of the main components outside of the case.
Mode 2 – Rotated Mode
In rotated mode, the motherboard tray is installed with the rear I/O located at the PSU shroud, with a pass-through channel for the ports to the rear of the case. Maintaining the same cooling support as in Standard mode, upright GPU mounting is also supported for a tower-like look. This mode allows for a unique PC look and direct ventilation of the GPU from the front panel, ensuring optimal thermal performance.
Mode 3 – Dual System Mode
With the motherboard tray elevated, two systems can be installed in the main chamber of the V3000 PLUS. Up to EEB motherboards on the system 1 tray, and a Mini-ITX motherboard above the PSU shroud. In this configuration, up to 11 x 120mm fans, 2 x 480mm radiators (top and front), and up to a 280mm radiator (above PSU shroud) can be installed. The rear panel’s PSU mounting bracket can be replaced by a dual PSU for ATX and SFX mounting compatibility. The same bracket can support a vertical GPU mounted in the PSU shroud compartment with direct air intake from the side mesh panel.
Extreme Storage
The LIAN LI V3000 PLUS is an ideal solution for data storage with support for up to 16 SSDs/HDDs. Inside the PSU shroud, 2 adjustable drive cages hold 4x HDDs/SSDs each. In the main chamber, up to 4 SSDs can be mounted. Alternatively, the mounting brackets can be removed and the PSU shroud drive cages can be relocated beside the motherboard. And behind the motherboard tray, 4 toolless SSD mounting trays are also available for additional storage.
Additional Accessories
The drive cages can be upgraded with hot-swap drive modules. Each backplate supports 2 drives, with a maximum of 4 hot-swap drive modules supported. For a vertical GPU solution while in Standard mode, a 200mm riser cable (90-degree to 180-degree connection) additional accessory is available. In the dual system, the second system’s GPU in the dual system mode, users can mount their GPU in the PSU shroud compartment with an additional 240mm riser cable (90-degree to 90-degree connection) accessory.
Availability
The V3000 PLUS is available for pre-order starting November 18th, 2022. A white version of the V3000 PLUS will be available in January 2023.
Pricing
The LIAN LI V3000 PLUS full tower chassis has a suggested retail price of US$499.99. Available for pre-order on Newegg in the United States. Also available for pre-order on PC Case Gear in Australia for AUD$849.
Accessories Sold Separately
Hotswap Drive Module: $14.99
Vertical GPU PCIe 4.0: $59.99
Dual System PCIe 4.0: $49.99
